Getting Started With Huawei

Simulate Huawei Router and Switches and connect them to GNS3

Necessary downloads

Download ENSP

Installation

Download the eNSP windows setup file and install it. 1 2


Launching ENSP

Once you install eNSP, open it. Now I am going to show, how to connect eNSP with GNS3. Have a look at the topology now.

Topology

Untitled Diagram(14) The above picture is the real topology I am going to implement. Bellow here the techniques describes to connect huawei to cisco.

Topology Described

Untitled Diagram(15)

Emulation

4 Here I used a Virtual interface having UDP port address translation/mapping features.

Cisco >> Inside Port: 30100 >> Loopback interface 127.0.0.1 >> Outside Port: 30001
Huawei >> Inside Port: 30001 >> Loopback interface 127.0.0.1 >> Outside Port: 30100

Interface Setup

Now see what are the configurations need to do here.

GNS-Cisco

9

6

Huawei – eNSP

10

5


Configuration

Now we are ready to move on to the configuration and checking.

Cisco
interface FastEthernet0/0  ip address 192.168.100.1 255.255.255.0  duplex auto  speed auto !
Huawei
interface GigabitEthernet0/0/1  ip address 192.168.100.2 255.255.255.0 #

Varification

Now check whether it is running properly.

Varify Cisco

7

Varify Huawaei

8 Thank you. Discussions on Huawei Switches will be posted soon under “Huawei” category..  


 


 

  Previous Next  

Leave a Reply